Morse Lens

Research

How fast can a camera read morse code?

30 fps reads light reliably up to 15 WPM. 60 fps reaches 20.

Findings.

  • At 30 frames per second, the decoder read 99.7% of characters correctly at 15 WPM.
  • At 30 frames per second and 20 WPM, accuracy fell to 33.8%.
  • At 60 frames per second, the decoder read 98.6% of characters at 20 WPM and 65.5% at 25 WPM.
  • At 15 frames per second, accuracy was 99.4% at 10 WPM and 80.3% at 15 WPM.
  • Hand-sent timing that varies by 20% cost little: 98.7% at 30 fps and 15 WPM.

The limit follows from the dot length. At 20 WPM a dot lasts 60 ms, which is under two frames at 30 fps (33 ms each). Once a dot can fall inside a single frame, dots and gaps start to disappear.

Character accuracy by speed and frame rate.

Speed15 fps30 fps60 fps
MachineHandMachineHandMachineHand
5 WPM100%100%96.9%99.9%98.4%98.4%
10 WPM99.4%97.7%100%100%99.9%99.9%
15 WPM80.3%88.1%99.7%98.7%100%99.9%
20 WPM46.5%47.4%33.8%43.3%98.6%96.4%
25 WPM13.3%14.2%15%14.9%65.5%49.1%
30 WPM16.5%18.2%16.7%16.7%16.5%16.7%

Method.

  • 1080 runs: 10 sentences, 3 random seeds each, at 6 speeds, 3 frame rates and 2 sender types.
  • The footage is simulated, not filmed: a light switches between two brightness levels with sensor noise, sampled at the frame rate with a random phase.
  • Machine senders use exact timing. Hand senders vary every flash and gap by up to 20%.
  • Accuracy is 1 minus the edit distance between sent and decoded text, divided by the message length.
  • The decoder is the one running on this site. Real cameras add blur, auto-exposure and dropped frames, so real results will be somewhat lower.

Raw numbers for every run group: data.json. Run date: 2026-11-17. Try it yourself with the light decoder, or check timings in the WPM calculator.

Questions.

What is the fastest morse a phone camera can read?

About 15 WPM at 30 fps and about 20 WPM at 60 fps, in our simulated tests.

Why does accuracy drop so suddenly?

Because a dot becomes shorter than two frames. Below that, some dots are captured in one frame or missed.